120 Ton, HACO 12' SYNCHROMASTER HYDRAULIC PRESS BRAKE, ATS 560 CNC   Our stock number: 5942

120 Ton, HACO 12' SYNCHROMASTER HYDRAULIC PRESS BRAKE, ATS 560 CNC

MODEL: SRM-120-12-10

Tonnage: 120 tons
Capacity: 120 tons
Overall Bending Length: 144"
Clear Distance Between Housings: 124"
Maximum Stroke (Programmable): 7.8"
Throat: 9.8"
Open Height: 15.7"
H.P. Electric Motor: 15 HP
Voltage: 220/440 VAC
Rapid Approach Speed: 165"/min
Maximum Press Speed (Programmable): 24"/min
Rapid Return Speed: 189"/min
Length: 162"
Overall Height: 98"
Front/Back: 67"
Weight: 18,100 lbs

Price includes ATS 560 CNC Depth Programming Control.

For ATS 570 Depth Programming Control ADD: $ 4,600.00
For ATS 6000 Angle Programming Control ADD: $10,200.00
For ATS 9000 Graphic Angle Programming ADD: $20,790.00


CONSTRUCTION
Rugged all steel interlocked and welded construction for

maximum strength and minimum deflection. All frames are

stress relieved after welding to provide as near perfect

surfaces as possible, which in turn results in better bends.

The all-welded construction also resists torque twist that

is sometimes found in bolt-together designs.

Flush floor mount. No pit or special foundation required.

Precision bed and ram. SRM press brakes use single, deep-

sectioned plates for the bed and ram. The ram is fitted

with more punch clamping plates and bolts than is commonly

found on other machines. This enables the operator to

easily and securely clamp small tooling segments if he is

not using one long punch. The bed is an integral part of

the machine frame and is machined in one set up in

conjunction with the ram ways and cylinder mounts. This

insures positive alignment relationships between the ram,

bed and frame for guaranteed accuracy.

The bed has a removable table and can be re-machined in the

event of accidental overload damage or eventual wear from

the tooling. Crowning to suit your application is done by

our service engineer upon installation of the machine. The

amount of crown can easily be changed if necessary. Manual

controlled crowning tables are offered as an option.

Full length die slot in removable table with set screws.

Large throat gaps in side frames and a unusually clear

working space.

Machine comes standard with American style tool holders.

European (Amadar) style tool holders with built-in wedge

system, with or without quick manual clamping can be

installed as an option as well as hydraulic upper tool

clamping for both above systems.

The use of non-metallic gibs prevents galling of the bearing

surfaces and permits minimum clearances for accurate ram

guidance.

Rotating pendant mounted control.

The cylinders are manufactured by HACO, they used Parker

Polypac and wiper seals. All hydraulic components are

mounted on top of the machine free from debris and dirt.

The hydraulic design is easy to service and the machine

comes complete with hydraulic fluid. The hydraulics on the

SYNCHROMASTER are simply, yet accurate and most importantly

dependable. The system has a built-in safety relief valve.

If an attempt is made to bend material incapable of being

bent, the machine will automatically open the safety relief

valves to release pressure and prevent machine overloads.

Most hydraulic and electric components are standard

industrial/commercial grade, off-the shelf items from major

manufacturers such as Parkerr, Vickersr, Rexrothr or

Hoerbiggerr hydraulics and Telemecaniquer or ABBr electrics.

Movable foot pedal with handgrab, dual foot pedals for ram

control. Second foot pedal and two- hand control are offered

as an option.

CONTROL
This machine comes standard with our ATS 560 three (3) axis

control.
( Y1-Y2 & X)
The ATS 560 is an easy to program, low cost control for

metal fabricators in need of a simple but efficient CNC

machine.
Important:
This control is only programmable in depth! When ordering

tooling from your supplier be sure to order Air Bending

Tooling ! ( Cut at 85 Degrees)

Control Features:
* Automatic back stop positioning (X-axis)
* Automatic depth stop positioning (Y-axis) (Y1-Y2)
* +/- .0004" ram repeatability
* +/- .004" back gauge repeatability
* Memory: 200 programs with 2 steps each ( 400 steps total)
* Jog mode
* Programmable speed change-over point
* Programmable stroke
* Position speed 580 IPM
* Electronic pressure adjustment and read out
* Electronic part counter

The ATS 560 has 2 work modes:
1) Manual mode:
The operator enters a backstop dimension and a depth

dimension. Both axes position automatic to the entered

values. The required tonnage can be entered to protect the

machine against overloads. On the display you can see the

back or depth stop dimension and tonnage read out.

2) Automatic mode:
The operator can enter several backstop dimensions and

depths up to 400 steps. When you run the program, the

control follows the different steps of the program. The

operator can follow the different steps on the display of

the control.


BACK GAUGE UNIT
The machine comes standard with an X-axis. The standard back

gauge has the following features:

- The X-axis comes standard with programmable position and

manually adjustable finger height, finger width.
- The machine comes standard with a 31" high speed back

gauge on ball screws (except 45 up to 75 ton series standard

is 26' Stroke!). We use a fast AC servo driven backstop on

our machines. The motor uses an optical encoder to ensure a

very high positioning accuracy.
- A steel dovetail gauge bar spans the distance between side

frames, allowing gauge fingers to be positioned manually

along its length.
- Two gauge fingers are manually adjustable (5.1/2" in

height) to accommodate different V-die heights. An

elevating screw, adjustable with by a hand wheel, provides

accurate height positioning.
- Over travel of the backstop is avoid by the use of two

limit switches and the CNC control.
- Back gauge X-axis automatically references at the initial

startup.
- Retraction is fully programmable. (Wait-Retract)


GENERAL
- Machine can be wired for 220 or 440V, 3 phase, 60Hz
- Service tools included.
- NO oil delivered with the machine.
- One safety, operator and service manual included.
- One year warranty on spare parts and labor, except

tooling. Warranty shall be considered void if the machine

is not used in a normal and proper manner, not properly

maintained, or modified for any special use. No other

warranty is either expressed or implied by HACO-ATLANTIC,

Inc. or any of its representatives. For the sake of its

expediency involving a minor failure, HACO-ATLANTIC, Inc.

may at its option allow the user to purchase a needed part

locally for which he will be reimbursed upon return of the

defective part.
- Installation, start up and training are included.


OPTIONAL EQUIPMENT
Filler block 12' L x 3.3/4" H x 3" W *$2,140.00
European style quick manual top clamping *$4,510.00
European style bottom manual clamping *$1,970.00
29" front support arm with 2 T-slots and 1 tilting stop

$410.00/each
T-slot in bed, price per side *$1,160.00
Additional tilting stop for front support arm $80.00/each
American style Hydraulic top claming *$7,820.00
Adjustable front support system includes: *$11,960.00
- two 29" front support arms with 2 T-slots and 1

tilting stop - manually adjustable in width along full

length of the machine - manually adjustable in height with

hand wheel Extra front support for above front support

system *$5,030.00/each
Second foot pedal in series with standard pedal *=$1,220.00
Emergency stop button in specified location *$340.00
Manual adjustable crowning table *$7,990.00
- mounted on top of the bed instead of standard table -

no loss of daylight opening
- maximum deflection +/- 0.080"
CNC controlled crowning tables *$14,560.00
- ATS560 and ATS570 the control crowning is adjustable

in %.
- ATS6000 and ATS 9000 the force and adjustment of the
crowning table is calculated automatically.
HACO Bend 2D off-line software for ATS 6000 and ATS 9000

$4,600.00
Two hand control *$3,800.00
18" Triad Superlight V, Infrared light curtain system

$2950.00 - 3/4 spaced light beam
- one beam floating blank capacity
Triad swing mount brackets, model 9000, price per pair

$995.00
Close loop Air Conditioner for Electrical Enclosure

$2,340.00
Extra operator's manual $70.00

* indicates factory installation only

BACK GAUGE OPTIONS
More price for 39" back gauge in lieu of standard 31"

*$540.00
More price for extra finger block $1,150.00
More price for (2) tiltable fingers in lieu of std.*=$520.00
Pneumatic finger height control *$3,150.00
More price for extra pneumatic finger block *$2,100.00
R-Axis available for ATS 6000 and ATS 9000 *$10,870.00





Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page